DAMIK HAWK Motion Sensor: Precision and Reliability
Looking for a smart lighting control solution that won't fail even in challenging conditions? The DAMIK PIR motion sensor is an advanced device that automatically turns on connected lights when motion is detected, ensuring comfort and energy savings.
Why choose the HAWK sensor?
Full 360° detection angle: The device monitors the entire area around the installation location, eliminating blind spots.
Intelligent Day/Night Operation: You can set whether the sensor operates 24/7 or only activates at dusk (below 3 LUX).
Timer Extension Function: If the sensor detects motion while the lamp is on, the countdown timer resets and starts again – the light will not turn off as long as you are in the room.
High Sensitivity: The sensor responds to infrared radiation emitted by humans, ensuring precise operation.
Key Features and Adjustment Options:
Range Adjustment (SENS): Detection distance can be adjusted (from 2 m to 6 m radius).
Timer Setting (TIME): The light can remain on for 10 seconds to 12 minutes after motion stops.
Light Sensor (LUX): Allows you to decide whether the device should operate only at night or also during the day (adjustable from 3 to 2000 LUX).
Automatic Hold: If the sensor detects motion while the light is on, the countdown starts over.
Technical Specifications:
Power Supply: 220-240 V / AC
Power Frequency: 50/60 Hz
Maximum Load: 1200 W (incandescent bulbs) / 600 W (energy-saving/LED bulbs)
Detection Range: 2–6 m (radius), adjustable
Detection Angle: 360°
Power Consumption: approx. 0.9 W
Mounting Height: Ceiling: 2–6 m
Detected Motion Speed: 0.6–1.5 m/s
Safety and Installation:
The device features high sensitivity and a modern integrated circuit. Remember to entrust installation to a specialist – installation requires disconnecting the power supply and properly connecting the wires according to the diagram.
Includes:
DAMIK HAWK PIR sensor.
Instruction manual in Polish and English.
New
119360B
487 Items
No customer reviews for the moment.
error
Your review appreciation cannot be sent
feedback
Report comment
Are you sure that you want to report this comment?
check_circle
Report sent
Your report has been submitted and will be considered by a moderator.
error
Your report cannot be sent
Write your review
check_circle
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Zasilacz LED TCI DC 70W 24V 2,9A SLIM R DALI
Zasilacz do zabudowy:
Niezależny Zasilacz IP20, do użytku wewnątrz pomieszczeń.
Może być stosowany do sprzętu oświetleniowego w klasie ochrony I.
Moc: 70 W
Napięcie znamionowe: 220 ÷ 240V...
DAMIK Dove 360° PIR Motion Sensor 2000W Black
Surface-Mounted Ceiling
The DAMIK Dove 360° motion sensor is a high-quality PIR detector designed for ceiling mounting. It automatically controls lighting or other connected devices based on detected...
Cyfrowa taśma LED RGB SPI 5050 24V
Ra90 SDCM<5 | 60LED/m | 12W/m | IP20 | 5m
Taśma LED LSE24 RGB SPI to wysokiej jakości cyfrowa taśma LED oparta na diodach SMD 5050, zaprojektowana do dynamicznych efektów świetlnych,...
MiBoxer WL5-WP – 5w1
Sterownik LED WiFi+RF | IP67 | 12–24V
MONO/CCT/RGB/RGBW/RGB+CCT
MiBoxer WL5-WP to uniwersalny, 5w1 sterownik LED do taśm MONO, CCT, RGB, RGBW i RGB+CCT. Obsługuje sterowanie zarówno przez WiFi (Smart Life / Tuya), jak...
Merrytek MC113S D‑IR
profesjonalny czujnik ruchu i zmierzchu PIR
✅ Zastosowanie
Idealny do automatycznego sterowania oświetleniem w oprawach LED (plafony, lampy sufitowe) wewnątrz pomieszczeń: dom, biuro, korytarz, magazyn.
jakość i...
SkyDance RT7 2.4GHz RF LED CCT (CW/WW) Remote Control 4-Zone
The SkyDance RT7 is a modern, wireless 2.4GHz RF remote control designed for controlling CCT (CW/WW – warm/cool white) LED lighting. It allows for independent control of 4 zones,...
Zasilacz LED DC 75W 12V VPS LP 980mA
Sterownik do zabudowy:
Zasilacz elektroniczny AC/DC z wyjściem napięciowym, przeznaczony do instalacji zgodnych ze standardami zastosowań oświetleniowych.
Niezależny sterownik IP20, do użytku wewnątrz...
Taśma LED LCE 3010908 COB 24V 3000K CRI90 50W Damik
Gęste diody, płynna linia światła, profesjonalne wykończenie
Taśma LED Damik LCE 3010908 COB 24V 3000K to idealne rozwiązanie dla wymagających użytkowników, którzy cenią sobie jakość,...
DAMIK złączka łącznik do taśmy LED COB 10mm
Mono | 2 pin | DC 3–24V | 5,5A | IP20
Szybko złączka DAMIK typu strip-to-wire z kablem 15cm to praktyczne i niezawodne rozwiązanie do łączenia jednokolorowych taśm LED COB o szerokości 10 mm z...
MiBoxer SPIR3-M 3-in-1 Mini SPI LED Controller 2.4GHz
The MiBoxer SPIR3-M is a modern 3-in-1 mini SPI LED controller that supports single-color, RGB, and RGBW strips. Equipped with 2.4GHz RF technology, it ensures stable, fast, and...
DAMIK Finch 360° PIR Motion Sensor 2000W Black with White Eye
Surface-mounted ceiling
The DAMIK Finch 360° motion sensor is a reliable ceiling-mounted device that automatically controls lighting or other connected devices based on detected motion...
ECO FLAT 30W - 550/600/650/750mA
Zasilacz wieloprądowy:
z przełącznikiem DIP do wyboru prądu wyjściowego.
Zasilacz do użytku wbudowanego.
Może być stosowany do sprzętu oświetleniowego w klasie ochrony I i II
Moc: 30 W
Napięcie...
DAMIK COB LED strip 12V 10W/m 3000K
CRI80, 320 LED/m, 5m, IP20
The DAMIK COB LED strip is a modern light source with a uniform beam without the spot effect. Thanks to COB technology, the light is uniform and pleasing to the eye, ideal for...
error Your review appreciation cannot be sent