The MiBoxer B3 is an elegant, wall-mounted touchscreen remote for controlling RGBW lighting (full color + brightness). It allows for independent control of 4 zones and operates on the 2.4GHz RF band, ensuring convenient operation without the need for wires.
Main Features:
RGBW lighting control
Supports 4 independent zones
Functions: color selection, brightness selection, white color selection, dynamic modes
Touch color ring + function buttons
RF 2.4GHz communication – range up to 30 m
Compatible with MiBoxer controllers (e.g. FUT039S, LS2, FUT043)
Power supply: 2× AAA (not included)
Mounting: wall-mounted – flush-mounted
MiBoxer B3-B - Features
Turning on and off connected LED lighting
Turning on and off all zones simultaneously
Dimming and brightening connected LED lighting
Dimming and brightening all zones simultaneously
Changing the RGB light color of connected LED lighting
Changing the RGB light color of all zones simultaneously
Selecting the white light of connected LED lighting
Selecting the white light of all zones simultaneously
Immediately reducing the brightness
Turning off the lighting with a 60-second delay
Four zones to be used
Radio range up to 30 meters
Glass wall panel
Possibility of system expansion
Audible signal
Soft LED illumination indicating device operation
Design suitable for surface mounting
B3-B
33 Items
No customer reviews for the moment.
error
Your review appreciation cannot be sent
feedback
Report comment
Are you sure that you want to report this comment?
check_circle
Report sent
Your report has been submitted and will be considered by a moderator.
error
Your report cannot be sent
Write your review
check_circle
Review sent
Your comment has been submitted and will be available once approved by a moderator.
TCI MPE 60W / 350mA SLIM LED Power Supply
In-wall driver:
Multi-current driver with DIP switch for output current selection.
Suitable for Class I lighting equipment.
Active power factor corrector.
Specifications:
Power: 25 - 43.75 W
Nominal...
DAMIK 8mm COB LED Strip Connector
The DAMIK strip-to-wire connector is a quick and convenient solution for connecting single-color 8mm COB LED strips. Thanks to the built-in wire (15 cm, 20AWG), soldering is not required, significantly speeding...
MiBoxer K0S – 4-Zone CCT 2.4GHz Rotary Panel
The elegant MiBoxer K0S remote control panel with a rotary knob allows for convenient control of four zones of CCT LED lighting (adjustable white color). The device communicates wirelessly in the 2.4...
75W 24V DC LED Power Supply – Model DLS 75-24753125
Reliable power for your LED strips
Looking for a compact, efficient, and safe 24V LED strip power supply? The DLS75 is the perfect solution for home, office, and commercial lighting...
DAMIK SLS 24-24 Slim LED Power Supply
24V 24W (1A), 100-240V
DAMIK's modern SLS 24-24 Slim LED power supply is an efficient and compact power source for LED strips and other 24V DC devices. Its slim and narrow design (only 1.8 cm in height and...
Mi-Light FUT092 RGB/RGBW/RGB+CCT LED Remote
FUT092 4-zone touchscreen remote. Allows you to change the color, color saturation, color temperature, and brightness of assigned devices. Mounts to the bracket.
The remote works with all strip...
ECO FLAT 30W - 550/600/650/750mA
Multi-current power supply:
with DIP switch for selecting the output current.
Power supply for built-in use.
It can be used for lighting equipment in protection class I and II
Data:
Power: 30W
Rated voltage:...
DAMIK COB LED strip 24V 10W/m 3000K
The LCE 24320 LED strip is a high-quality COB light source powered by 24V DC, featuring uniform light without visible LED dots. With a color temperature of 3000K (warm white) and a color rendering index of ≥80,...
DIN Rail Power Supply
Product Features:
Supply voltage: 85-264VAC or 120-370VDC
Mounts on a TS35/7.5 or 15 DIN rail
Operating temperature range: -30 to +70°C
No-load power consumption: <0.3W
Adjustable output voltage
Short-circuit, overload,...
TCI BTLT 149 T5 1x49W Electronic Ballast
Recessed Controller:
Suitable for lighting devices with Protection Class I and II.
Independent IP20 controller for indoor use.
Warm Start
Specifications:
Power: 49W
Nominal Voltage: 220 ÷ 240 V
Output...
DAMIK Dove 360° PIR Motion Sensor 2000W Black IP65
Surface-mounted, Ceiling-mounted
The DAMIK Dove 360° IP65 motion sensor is a durable ceiling-mounted device designed for both indoor and outdoor use. Its sealed IP65 housing makes it resistant to...
MiBoxer K3-B – Wall-Mounted LED Remote Control MONO+CCT
1-Zone | RF 2.4GHz | Black | Round
The MiBoxer K3-B is a modern, wall-mounted touchscreen remote control for controlling MONO (single-color) and CCT (tunable white) LED lighting. It supports...
HYTRONIK HCD418 DALI Microwave Motion Sensor
DALI HF Sensor HCD418
Presence sensor with three-stage control, designed for indoor use.
Suitable for recessed installation in:
Office/commercial lighting
Classrooms
Conference rooms
For use in...
Merrytek MC119S 5.8 GHz Microwave Motion Sensor + Light Sensor
The Merrytek MC119S sensor is a precise automatic lighting control device. Using microwaves (5.8 GHz) and a daylight threshold adjustment, it ensures that lights are turned on...
MiBOXER FUT038S
RGB/RGBW LED Controller 12A 12-24V
Full control, pure light magic!
Looking for a reliable LED controller that will take your lighting to the next level? The MiBoxer FUT038S is a modern, intelligent RGB and RGBW LED controller that...
MiBoxer FUT037W+ WiFi LED Controller 2.4G RGB/RGBW/RGB+CCT
12–24V DC, 12A
The MiBoxer FUT037W+ LED Controller is a universal device designed to control LED strips and luminaires in RGB, RGBW, and RGB+CCT systems. Thanks to its built-in WiFi...
MiBoxer SPIR3 – 3-in-1 SPI LED Controller
The MiBoxer SPIR3 is an advanced 3-in-1 SPI LED controller, compatible with digital strips. It enables impressive control of colors, animations, and dynamic modes – without cables, thanks to 2.4GHz RF...
MiBoxer FUT037Z+
RGB+CCT LED Controller | Zigbee 3.0
Build truly intelligent lighting!
The MiBoxer FUT037Z+ is a modern RGB+CCT LED controller that works with Zigbee 3.0 – an ideal choice for integration with Tuya, Home Assistant, Amazon Alexa,...
MiBoxer WL-BOX2 – WiFi Gateway
Control your lighting with the Tuya / MiLight app | Smart Home Ready
Turn your traditional MiBoxer / MiLight LED controllers into smart devices you can control from anywhere in the world!
The MiBoxer WL-BOX2 is a...
DAMIK SLS 60-24 Slim LED Power Supply
The modern DAMIK SLS 60-24 Slim LED power supply is an efficient and compact power source for LED strips and other 24V DC devices. Its slim and narrow design (only 1.8 cm in height and width) allows for...
MiBoxer FUT039S
RGB+CCT LED Controller 12–24V 2.4GHz
The MiBoxer FUT039S is an advanced LED controller designed for RGB+CCT (RGB + warm/cool white) strips operating at a voltage range of 12–24V DC. It enables full color control, color temperature...
Digital RGB LED Strip SPI 5050 24V
Ra90 SDCM<5 | 30 LEDs/m | 6 W/m | IP20 | 5m
The LSE24 RGB SPI LED strip is a high-quality digital LED strip based on 5050 SMD LEDs, designed for dynamic lighting effects, individual pixel control, and precise...
DAMIK DIN60 24V LED Power Supply
2.5A 60W DIN Rail Professional Power Supply for LED Strips
Key Specifications:
Model: DAMIK DIN30
Power Supply (Input): 100–240V AC 50/60Hz
Output Voltage: 24V DC
Output Current: 2.5 A
Maximum Power: 60W
Output...
MiBoxer B4 RGB+CCT LED Wall Remote
4-Zone | RF 2.4GHz | Surface-Mounted
The MiBoxer B4 is an advanced, wall-mounted touchscreen remote control for RGB+CCT LED lighting (full color palette + adjustable white). It supports 4 independent zones,...
error Your review appreciation cannot be sent